George Washington Chapter, Inc.
Classified Ads &Want Ads |
|
Ads will be removed after two months unless resubmitted.
Old car related items only, please, and no vehicles newer than 1975.
Email your ad request to chuckshaw@cox.net
For Sale/Wanted
Click
on Thumbnail pictures for larger picture
|
1929 Model A Ford Fordor
June 10, 2009 |
1929 Briggs Leatherback, completely unrestored, low mileage, original interior, one repaint on body, original color over original color, original leather top, car has always been kept indoors, absolutely no wood or metal rot. The car's condition is too good to restore, car should be in a museum, would make an excellent driver, recently mechanical upgrades by myself. Car is located in NC. $12,500.00 Don Temple, 252/923-9903 |
|
1931 Model A Ford Deluxe Coupe
May 29, 2009 |
1931 Model A Ford Deluxe Coupe, with rumble seat. Very nice straight body, all original steel, correct upholstery and rumble seat. Has sealed beams, (but I am converting back to original), has hydraulic brakes, and nicely installed, but can also be converted back to original. I am rewiring it entirely. Frame is extremely nice with no pitting and doors close perfectly. Price $16,000. Call Don Temple, 252/923-9903 for location and information.
|
|
1929 Model A Ford Tudor
May 25, 2009 |
1929 Model A Ford Tudor. Restored from the frame up with all new parts. Located in Slanesville, WV. $18,000.
Contact Don Perry at 304-492-4100 or email DonPerry42@cs.com
|
|
1930 Model A Ford Coupe Price reduced to $16,800
May 5, 2009 |
Body Style: Five-window, four-passenger coupe with rumble seat. Exterior: Green body and wire spoke wheels, black fenders and running boards. Interior: Brown tweed and mohair front seats, brown mohair door and side panels, and brown vinyl rumble seat. Special Vehicle Features/Options: 200 Cl 40 HP L head 4 cylinder engine; three-speed manual transmission; manual steering; manual mechanical drum brakes; "open" rear axle and differential assembly, with 3.77:1 gear ratio; left front fender-mounted spare tire and wheel; outside rearview mirror mounted on spare tire and wheel; outside sunvisor; rear luggage rack; and Sears 4.75/5.00/5.25/5.50x19" blackwall tires. Odometer Reading: 99,952 $18,500 Reduced to $16,800 Contact Michael Heaps Cell: 443-617-3902 or Email: mheaps@zoominternet.net
|
|
1940 and 1930 Virginia license plates
June 29, 2009 |
I have a pair of 1940 and 1930
Virginia newly restored license plates.
I purchased them both from Tagsrus
for $285.00 each, will sell each pair for $200.00.
Toby Aaron
e:taaron@tradeshowlogistics.com
Located in McLean, VA. PH: 703-408-3993
|
|
1930 Model A Ford Pickup
January 26, 2009 |
Late 1930 Model "A" PickupTruck:
Washington blue with black fenders. Truck bed has oak rails. Stored
indoors. Older restoration. Includes parts in building: extra pair
of steel front fenders each with wheel wheels, Model "A" tools, two
radiator shells-one 1930, one 1931. Located in Hyattsville,
MD.
Price $19,000.
Also have 32 B distributor missing
top and two more that are rusty. Asking $125.00.
Have many parts outdoors such as: 4
short blocks, 3 front axles, 2 rear axles-one may be for "AA"-truck,
several wishbones, bell housing covers. Make offer.
Call Robert
Mechner: Home phone (301) 871-1299, or email:
rmechner@aol.com
|
|
1928 Early (AR) Model A Phaeton
October 10, 2007 |
1928 AR Phaeton. I have been wrestling with the decision
to sell my 28 AR phaeton. #131,xxx. It is in pieces with most parts primed.
Frame is straight and painted. Lots and lots of parts i.e. 10 doors, extra
front fender, 4 windshields, 5 transmissions; 2 straight and painted frames,
AR radiator shield and fan shroud, 4 early brake sets with 3 dog bones,
several early carburetors and many boxes of parts. I did the
disassembly and all small parts are bagged and marked. It has been a dream
for 20+ years to build this car, but it seems not to be happening. I don’t
foresee the time when I can focus on it. Way too much to ship. Located in
Northern Virginia. $7500 for all. |
|
Custom Gear Shift Knobs for Model As
|
Custom made hardwood gearshift knobs for Model As. An insert in the bottom matches the threads on the gear shift lever. Walnut or cherry, with clock insert, $35., postage paid anywhere in the USA. Contact Sewall Tyler, doverdam@hotmail.com |
|
WANTED Model A clutch pressure plate |
WANTED Model A clutch pressure plate Contact Sewall Tyler, doverdam@hotmail.com
|
